AML Dual-Handle Industrial Material Lifts 1

AML Dual-Handle Industrial Material Lifts 2

AML Dual-Handle Industrial Material Lifts 3

AML Dual-Handle Industrial Material Lifts

Industrial material lifts are designed with standard and a dual-handle, shift-on-the-fly, one-speed winch lift materials quickly for increased productivity.The manual hand winch stacker can be loaded easily into a pickup truck.

Inquiry

Write a Review

SPECIFICATIONS

Dimensions	AML3	AML4.5	AML6	AML7.5
Lift height – forks up	3.49m	4.98m	6.46m	7.94m
Lift height – forks down	2.97m	4.46m	5.94m	7.42m
Stowed width	0.8m	0.8m	0.8m	0.8m
Stabiliser width	1.85m	1.85m	1.85m	1.85m
Stowed length	0.74m	0.74m	0.74m	0.74m
Operating length	1.51m	1.88m	2.08m	2.08m
Stowed height	1.99m	1.99m	1.99m	1.99m
Fork length	0.75m	0.75m	0.75m	0.75m
Performance
Max. load capacity(0.36m load centre)	454kg	363kg	363kg	295kg
Max. load capacity(0.61m load centre)	454kg	363kg	295kg	204kg
Max. load capacity(1.07m load centre)	181kg	227kg	159kg	113kg
Winch (high speed)	13.1cranks/m
Winch (low speed)	49.2cranks/m
Weight	148kg	176kg	205kg	231kg

	The first-section pulley frame is structurally optimized as a welded support, ensuring the bending angle and adding reinforcing ribs to strengthen the bracket.
Sequential lifter: The purpose is to ensure that each mast section is lifted in sequence, enhancing safety.
	The pulley adopts high-strength injection-molded components. The dedicated screw for the pulley, with the light rod section coordinated with the bearing, is more reasonable in structure compared to competitors. The pulley fixing block is made of No.5 zinc alloy material, providing higher strength. This is a molded part, ensuring more precise dimensions, including angles.
The mast is equipped with maintenance hole for the anti-fall mechanism, facilitating repairs.
	Stabilizer rotating joint: Optimized isolating sleeve for a secure fixation, convenient rotation, and a reliable structure.
The lower limit of the mast is a dual-limit position, and each is equipped with a rubber shock absorber, providing a noticeable cushioning and shock absorption effect without any abnormal noise.

The whole production of AML3 Dual-Handle Industrial Material Lifts is carried out by skillful, experienced professionals.

Dimensions	AML3
Lift height – forks up	3.49m
Lift height – forks down	2.97m
Stowed width	0.8m
Stabiliser width	1.85m
Stowed length	0.74m
Operating length	1.51m
Stowed height	1.99m
Fork length	0.75m
Performance
Max. load capacity(0.36m load centre)	454kg
Max. load capacity(0.61m load centre)	454kg
Max. load capacity(1.07m load centre)	181kg
Winch (high speed)	13.1cranks/m
Winch (low speed)	49.2cranks/m
Weight	148kg

	The first-section pulley frame is structurally optimized as a welded support, ensuring the bending angle and adding reinforcing ribs to strengthen the bracket.
Sequential lifter: The purpose is to ensure that each mast section is lifted in sequence, enhancing safety.
	The pulley adopts high-strength injection-molded components. The dedicated screw for the pulley, with the light rod section coordinated with the bearing, is more reasonable in structure compared to competitors. The pulley fixing block is made of No.5 zinc alloy material, providing higher strength. This is a molded part, ensuring more precise dimensions, including angles.
The mast is equipped with maintenance hole for the anti-fall mechanism, facilitating repairs.
	Stabilizer rotating joint: Optimized isolating sleeve for a secure fixation, convenient rotation, and a reliable structure.
The lower limit of the mast is a dual-limit position, and each is equipped with a rubber shock absorber, providing a noticeable cushioning and shock absorption effect without any abnormal noise.

Hyneelift AML6 manual material lift is readily resilient for every job.Capable of handling industrial -strength tasks.It is ideal for wide loads as well as narrow doorways,and can be loaded easily into a service van.

Dimensions	AML6
Lift height – forks up	6.46m
Lift height – forks down	5.94m
Stowed width	0.8m
Stabiliser width	1.85m
Stowed length	0.74m
Operating length	2.08m
Stowed height	1.99m
Fork length	0.76m
Performance
Max. load capacity (0.36m load centre)	363kg
Max. load capacity (0.61m load centre)	295kg
Max. load capacity (1.07m load centre)	159kg
Winch (high speed)	13.1cranks/m
Winch (low speed)	49.2cranks/m
Weight	184kg

	The first-section pulley frame is structurally optimized as a welded support, ensuring the bending angle and adding reinforcing ribs to strengthen the bracket.
Sequential lifter: The purpose is to ensure that each mast section is lifted in sequence, enhancing safety.
	The pulley adopts high-strength injection-molded components. The dedicated screw for the pulley, with the light rod section coordinated with the bearing, is more reasonable in structure compared to competitors. The pulley fixing block is made of No.5 zinc alloy material, providing higher strength. This is a molded part, ensuring more precise dimensions, including angles.
The mast is equipped with maintenance hole for the anti-fall mechanism, facilitating repairs.
	Stabilizer rotating joint: Optimized isolating sleeve for a secure fixation, convenient rotation, and a reliable structure.
The lower limit of the mast is a dual-limit position, and each is equipped with a rubber shock absorber, providing a noticeable cushioning and shock absorption effect without any abnormal noise.

Hyneelift AML7.5 is dependable rugged.This high specification lift offers lifting heavy loads to help increase productivity and value to fit specific worksite needs. The industrial material lift is narrow enough to maneuver through doorways.Robust to handle the demands of rental industry.

Dimensions	AML7.5
Lift height – forks up	7.94m
Lift height – forks down	7.42m
Stowed width	0.8m
Stabiliser width	1.85m
Stowed length	0.79m
Operating length	2.08m
Stowed height	1.99m
Fork length	0.76m
Performance
Max. load capacity (0.36m load centre)	295kg
Max. load capacity (0.61m load centre)	204kg
Max. load capacity (1.07m load centre)	113kg
Winch (high speed)	13.1cranks/m
Winch (low speed)	49.2cranks/m
Weight	204kg

	The first-section pulley frame is structurally optimized as a welded support, ensuring the bending angle and adding reinforcing ribs to strengthen the bracket.
Sequential lifter: The purpose is to ensure that each mast section is lifted in sequence, enhancing safety.
	The pulley adopts high-strength injection-molded components. The dedicated screw for the pulley, with the light rod section coordinated with the bearing, is more reasonable in structure compared to competitors. The pulley fixing block is made of No.5 zinc alloy material, providing higher strength. This is a molded part, ensuring more precise dimensions, including angles.
The mast is equipped with maintenance hole for the anti-fall mechanism, facilitating repairs.
	Stabilizer rotating joint: Optimized isolating sleeve for a secure fixation, convenient rotation, and a reliable structure.
The lower limit of the mast is a dual-limit position, and each is equipped with a rubber shock absorber, providing a noticeable cushioning and shock absorption effect without any abnormal noise.

Send Us A Message.

Please send a message with any need of vertical lifts.