SML Construction Mini Material Lifts

Hyneelift specification mini material lifts offer a reduced height mast and narrow design that can be easily maneuvered, even when stowed. Featuring a shorter mast, this mini manual stacker easily fits through interior doorways.

Inquiry

Write a Review

SPECIFICATIONS

Dimensions	SML3.3	SML4.4	SML5.5
Lift height – forks up	3.8m	4.9m	6m
Lift height – forks down	3.3m	4.4m	5.5m
Stowed width	0.8m	0.8m	0.8m
Stabiliser width	1.63m	1.63m	1.63m
Stowed length	0.74m	0.74m	0.74m
Operating length	1.72m	1.85m	2.1m
Stowed height	1.6m	1.6m	1.6m
Fork length	0.75m	0.75m	0.75m
Performance
Max. load capacity(0.36m load centre)	318kg	295kg	272kg
Max. load capacity(0.61m load centre)	200kg	195kg	181kg
Max. load capacity(1.07m load centre)	84kg	80kg	80kg
Winch (high speed)	13.1cranks/m
Winch (low speed)	49.2cranks/m
Weight	125kg	138kg	156kg

	The first-section pulley frame is structurally optimized as a welded support, ensuring the bending angle and adding reinforcing ribs to strengthen the bracket.
Sequential lifter: The purpose is to ensure that each mast section is lifted in sequence, enhancing safety.
	The pulley adopts high-strength injection-molded components. The dedicated screw for the pulley, with the light rod section coordinated with the bearing, is more reasonable in structure compared to competitors. The pulley fixing block is made of No.5 zinc alloy material, providing higher strength. This is a molded part, ensuring more precise dimensions, including angles.
The mast is equipped with maintenance hole for the anti-fall mechanism, facilitating repairs.
	Stabilizer rotating joint: Optimized isolating sleeve for a secure fixation, convenient rotation, and a reliable structure.
The lower limit of the mast is a dual-limit position, and each is equipped with a rubber shock absorber, providing a noticeable cushioning and shock absorption effect without any abnormal noise.

The QC team has been always paying close attention to the quality of this product.

With light weight and low-cost material lifts,Hyneelift SML4.4 can handle heavy tasks.Featuring reduced mast to fit through interior door.

Dimensions	SML4.4
Lift height – forks up	4.9m
Lift height – forks down	4.4m
Stowed width	0.77m
Stabiliser width	1.63m
Stowed length	0.91m
Operating length	1.85m
Stowed height	1.6m
Fork length	0.76m
Performance
Max. load capacity (0.36m load centre)	295kg
Max. load capacity (0.61m load centre)	195kg
Max. load capacity (1.07m load centre)	80kg
Winch (high speed)	13.1cranks/m
Winch (low speed)	49.2cranks/m
Weight	138kg

	The first-section pulley frame is structurally optimized as a welded support, ensuring the bending angle and adding reinforcing ribs to strengthen the bracket.
Sequential lifter: The purpose is to ensure that each mast section is lifted in sequence, enhancing safety.
	The pulley adopts high-strength injection-molded components. The dedicated screw for the pulley, with the light rod section coordinated with the bearing, is more reasonable in structure compared to competitors. The pulley fixing block is made of No.5 zinc alloy material, providing higher strength. This is a molded part, ensuring more precise dimensions, including angles.
The mast is equipped with maintenance hole for the anti-fall mechanism, facilitating repairs.
	Stabilizer rotating joint: Optimized isolating sleeve for a secure fixation, convenient rotation, and a reliable structure.
The lower limit of the mast is a dual-limit position, and each is equipped with a rubber shock absorber, providing a noticeable cushioning and shock absorption effect without any abnormal noise.

Hyneelift SML5.5 raises standards in material lifting. Ideal for industrial and warehouse applications, a dual handle,durable winch quickly raises loads to increase productivity.

Dimensions	SML5.5
Lift height – forks up	6m
Lift height – forks down	5.5m
Stowed width	0.77m
Stabiliser width	1.63m
Stowed length	0.91m
Operating length	2.1m
Stowed height	1.6m
Fork length	0.76m
Performance
Max. load capacity (0.36m load centre)	272kg
Max. load capacity (0.61m load centre)	181kg
Max. load capacity (1.07m load centre)	80kg
Winch (high speed)	13.1cranks/m
Winch (low speed)	49.2cranks/m
Weight	156kg

	The first-section pulley frame is structurally optimized as a welded support, ensuring the bending angle and adding reinforcing ribs to strengthen the bracket.
Sequential lifter: The purpose is to ensure that each mast section is lifted in sequence, enhancing safety.
	The pulley adopts high-strength injection-molded components. The dedicated screw for the pulley, with the light rod section coordinated with the bearing, is more reasonable in structure compared to competitors. The pulley fixing block is made of No.5 zinc alloy material, providing higher strength. This is a molded part, ensuring more precise dimensions, including angles.
The mast is equipped with maintenance hole for the anti-fall mechanism, facilitating repairs.
	Stabilizer rotating joint: Optimized isolating sleeve for a secure fixation, convenient rotation, and a reliable structure.
The lower limit of the mast is a dual-limit position, and each is equipped with a rubber shock absorber, providing a noticeable cushioning and shock absorption effect without any abnormal noise.

Send Us A Message.

Please send a message with any need of vertical lifts.